1.Install Commview.
2.Open commview and install the commview drivers to a card. It should prompt you
about your card and than automatically install the driver.
3.Go to the rules tab and check enable advanced rules
4.Type in the box labled formula " tods=1 and dmac=FF:FF:FF:FF:FF:FF " then type a
name for your formula in the box labled name and than click add/edit.
5.This should now appear in the upper box. if it is not checked, check it.
6.Click settings = options = memory usage and turn maximum packets in buffer to
20000. If it prompts you to restart it, do so. There are three funnel
looking things on the main menu bar of commview. uncheck all but the first one
(one labled capture data packets)
7.Click the play button and scan for the network you want to ¢яα¢к.
8.Once you have found it, drag the channel menu down to the desired channel and
click capture.
9.Now using your other adapter thats not capturing, connect to the password
protected network. when it asks you for key, type in something random, like
1234567890.
10.It should now say connected with limited connectivity.
11.Go back to your commview menu and click on the packets tab. you should see a
couple of packets.
12.Looking at the protocol column, you should see a couple labled IP/UDP, ARP
REQ, and a couple of others. Right click on any packet labled “ARP REQ†and
than click send packet, and selected. A mini menu should now appear.
13.On the mini menu, change packets per second to 2000, and rather than 1
time(s), click continuously, and Then click send.
14.Go back to the main commview window and go to the rules tab, and uncheck the
rule you made.
15.You are now injecting and you should see the number of packets rising
really fast.
16.Save the packets, you have to save every 20000 packets, click file, save
and than in the save dialogue, remember where you saved it, and instead of
saving it as an ncf file, save it as a dump cap file.
17.Extract the Aircrack-NG.
18.open aircrack-ng-GUI that can be found in the map “bin†and select the files
you saved, and than click launch.
19.Look at the list of IV’s you have, and select the network you want to ¢яα¢к
there should be a list of a lot of them, chose the one with the most IVs.
20.You should now be connected to the desired network.
21. Once connected use windows to display the network access code in text rather
than hex, right click the network, select properties and tick the show charicters box.
_____╙♥♫☻(๏_нα¢кєяszone_๏)☻♫♥╜_____
(¯`v´¯)»»-(¯`v´¯)-»»-(¯`v´¯)»нα¢кιηg NEVER STOPS»-(¯`v´¯)-»»-(¯`v´¯)-»(¯`v´¯)
(๏_∂ι¢ℓαмαтιση:нα¢кєяszone ιѕ ησт яєѕρσηѕιвℓє ƒσя ℓσѕѕєѕ ѕυƒƒєяє∂,мιѕяєρяєѕєηтαтισηѕ αη∂ σя вяєα¢н σƒ ¢σηтяα¢т вע αηע ∂єαℓ ѕтяυ¢к вєтωєєη тнє вυעєя αη∂ ѕєℓℓєя. нα¢кєя вσעѕ ¢нє¢кηg αℓℓ ѕσƒт αη∂ ℓιηк тнαη ωє υρℓσα∂є∂.ωє αяє ησт яєѕρσηѕιвℓє ƒσя αηע ѕσƒт αη∂ ℓιηк αяє ωσякιηg αяє ησт._๏)
═══════════════════════════════════════════════════════════════════
░░░░░░░░░░░░░░░░░░░░░░)!~=|!|*n!mbuzz_police005*|!|=~!░░░░░░░░░░░░░░░░░░░░░░░░░░░
۞۞۞۞۞۞۞۞۞۞۞۞нα¢кєяszone.FORUMOTION.IN۞۞۞۞۞۞۞۞۞۞۞۞۞۞۞۞۞۞۞
═══════════════════════════════════════════════════════════════════
Tue Dec 13, 2011 7:57 pm by 
Calendar
